5 Ways To Fix Vizio TV Has Sound But No Picture Issue

Due to the fact that so many other entertainment options are currently unavailable, watching television has become an increasingly important component of leisure time. Vizio TV is a brand that is quickly becoming quite well-known among consumers.

This is due to the fact that they are manufactured and constructed exceptionally well, with high-end resolution and quality. They also come with a tonne of built-in functionality as well as a variety of optional additions that customers want in this day and age, such as voice commands and SmartCast.

The problem with the Vizio TV having sound but no picture can significantly interfere with your enjoyment of what you’re watching, just as it would with any other viewing platform. It’s aggravating, and it looks like it would be difficult to fix even if you have any expertise of technology.

Within the scope of this article, we shall investigate a few different approaches to problem solving. You can give each of these straightforward solutions a shot before calling in a professional. We really hope that they may be of use to you in determining the precise cause of the issue.

In addition to this, we will present some potential solutions to consider. In a nutshell, we will do all in our power to assist you in retrieving the picture.

How to Repair a Vizio TV When It Only Has Sound but No Picture

1. Problems with the connectivity

The very first thing that you should do is check to see if you have neglected to install a necessary software update. If your device has the most recent software installed, the next thing you need to do is check that all of your power connections are functioning as they should be. At the same time, it is well worth your time to set your Vizio television to factory settings by performing a thorough reset on the device.

Disconnect all of the power lines in order to accomplish this. After that, press and hold the power button for a full minute, making sure that you keep it pressed in the entire time. After you have finished releasing this, you are free to rejoin any and all of your power cables. Extra caution should be taken to verify that all of the cables are securely attached and that nothing is hanging loose anywhere.

With any luck, your picture will have been repaired, and you’ll be able to continue enjoying the television that you were watching. If this does not work, continue reading the article for further solutions that you can put into practise.

However, it is important to remember this tidbit of information for potential usage in the future because carrying out this reset may be a straightforward solution to a lot of problems. If you are having any kind of problem, you should always make an effort to perform this simple activity first.

2. The Test Involving a Flashlight

There is a flashlight component built into your television set that is responsible for producing the light. If this doesn’t work, it’s possible that the picture is present, but it’s just too dim for us to make out what it is. To verify this, grab yourself a flashlight and hold it as close to the screen as possible, maintaining a distance of approximately 2 inches.

Turn the device on and move the light in a sweeping motion across the screen of the television. If you are able to make out the picture when it is illuminated by the light you are producing, then it is quite likely that the inverter board in your device has failed.

If the warranty on your Vizio TV is still valid, then you should be able to get this mended or replaced under the terms of the guarantee. However, if the set is out of warranty, any independent technician should be able to repair or replace the inverter board for you. The cost of this service should be lower than the cost of purchasing a new set.

3. The inputting channel

Because this is such a prevalent problem, there is a good possibility that the solution is as easy as switching the input channel. Because it is such a straightforward answer, putting it to the test is definitely something you should do. You can easily switch between the various input channels on your Vizio TV by using the button labelled “input” on the remote control.

Take a brief break on each of them and check to see if any of these input channels are displaying the picture for you. If any of them do, then you should preserve that particular setting as your default, and the photo will be accessible to you. Again, this is one that is one that is worth noting for future reference as it is always worth attempting as a possible simple remedy for a plurality of issues. It is always worth trying as a possible simple fix for a variety of problems.

4. Power Board

There is a good probability that the power board has malfunctioned in your Vizio television set if it is an older model and you have owned it for a considerable amount of time. Talk to the technical support team, and they might be able to give you some pointers on how to find the correct replacement part to make the adjustment.

A number of people have stated that they have created their own versions of models that are particularly simple to do so. You can obtain instruction videos and step-by-step guides by searching for “how to execute this remedy” on Google, as is the case with the majority of things in this day and age. If you are not sure in your ability to do this yourself, though, you should consider hiring an independent specialist to do so on your behalf.

5. Problem with the Screen

If you have tried all of these solutions, but you still do not have a picture, then there is a possibility that the LED or LCD screen has simply ceased functioning properly. This is especially likely if you have attempted all of the solutions listed above. Because the sound will continue to function well even if the LCD or LED display has become defective, we believe that this may be the cause of the problem. Once more, the only remedy to this problem is to either get the entire machine replaced or get the screen corrected.

Be sure to let them know which of these things you have tried as this should help them identify your problem a little bit quicker. If none of these seem like viable options, then we would always suggest contacting the technical support at Vizio directly. If none of these seem like viable options, then we would always suggest contacting the technical support at Vizio directly.