5 Ways To Fix Blinking Internet Light On Router
The majority of us now consider the internet to be an absolute requirement in our daily lives. Today, we rely on it for much more than just simple emailing; it also enables us to place food orders, work from home when necessary, and power our smart homes. It has grown to be viewed almost on par with other fundamental human rights in many regions of the world.
On the other hand, due to the complexity of the devices that we require to power our connections, a wide variety of problems may emerge at any one time. The more complicated the apparatus, the more room there is for something to go wrong with it. At the very least, it would appear that this is the case for us! Routers are not an exception to this rule.
he issue with the router’s light flashing is one of the most typical problems seen with routers. Therefore, in light of the fact that blinking lights are rarely an indication of something positive, we are going to discuss why this is occurring and how you can correct it.
What could be causing the Internet Light to flash on the Router?
When putting together these instructions, we make it a point to do our absolute best to clarify the issue at hand before attempting to resolve it. Our hope is that if you can figure out why these things are happening, you will be able to solve the problem much more easily the next time it occurs. The flashing light shouldn’t be too much of a concern for you. It does not imply that there has been any kind of catastrophic failure.
Instead, it only indicates that the internet signals are of a poor quality. It appears that the router is having trouble connecting to the internet, which is the message it is sending to you. Because of this, the solution that we need to implement is quite obvious. At this point, it is necessary for us to repair your internet connection. Let’s get stuck right into it!
1. A connection problem between the modem and the router
There was a problem with the connection between the router and the modem.
The link that runs between your router and modem may have become corrupted, which is the most likely explanation for the problem with the flashing light. Things of this nature have a propensity to develop naturally over the course of time. Examining the USB cable that is used to link the two devices is all that is required of you in order to determine whether or not this is the situation.
You need to make sure that either end is plugged in as securely as possible. This is what you should be looking out for. After that, we will search for indications of any kind of bodily harm. In the event that you observe any fraying of the exposed inner workings, it will be necessary for you to replace the cable in its entirety.
While you are here, make sure to straighten out any severe bends in the wire that you may have spotted while you were walking around. Your cable will deteriorate much more quickly than usual as a result of these factors.
2. It’s possible that all that’s required is a restart of the router.
If the cable seems to be in fine condition, we will have to begin analysing the problem at a level that is more on the technical side of the spectrum. When things of this nature take place, it is possible that they are the result of a minor problem or hiccup that is affecting the performance of your network.
To our relief, the majority of the time, this issue can be remedied by only restarting the router. The following is the procedure that we suggest using.
Instead of simply turning it off, please make sure that the equipment is completely unplugged before disposing of it. In addition to that, you need to make sure that you unplug any and all of the cords that are possibly plugged into it. In practise, this guarantees that the router will not get any form of electricity at all.
After all of that has been completed, you should just let it alone for at least a minute. Connecting the device to the modem through the ethernet port is the next step in determining whether or not the device is able to successfully establish a connection.
After that, all that is left to do is reconnect the power supply and check to see whether it will establish a connection that is reliable. If that is the case, then everything will be wonderful. In the event that this is not the case, we will need to proceed with troubleshooting the modem.
3. Conduct a test on the modem.
In order to proceed to the following step, we strongly suggest that you make use of the ethernet cable in order to make a direct connection between your computer and your router. You won’t have to rely on the wireless functionality of the gadget if you do it this way. In most cases, doing so will result in a faster internet connection for you as well as a resolution to the issue.
In addition to this, you ought to double check that the modem is operating normally. If this is the case, we would advise you to get in touch with your internet service provider as soon as possible to determine whether or not the issue is occurring on their end. It is frequently the case.
4. Verify that the firmware on your device has the most recent version.
Ensure that the firmware on your device is up to date.
If the light on your router is still blinking and you are unable to connect to the internet, this may be a sign that the router’s firmware needs to be updated. When these items are over their expiration dates, they do not perform as well as they are capable of doing. In the worst possible scenario, this will indicate that it will not work at all in any capacity. To our relief, finding a solution to this is not too difficult.
Visit the manufacturer’s website for your router. That is all that is required of you. There will always be the ability to check for firmware upgrades, even if the layouts of these will vary greatly from brand to brand.
Download them as soon as you can if there are any that you think you might have missed. If there are any, we would recommend downloading them as soon as possible. After you have it downloaded, all you need to do to fix the problem is connect the router to the device that you are attempting to use to access the internet, and you should find that the problem is fixed.
5. Reset the router to its factory settings.
The factory reset of the router is the final option available, and should be used only as a last resort. To reset the majority of routers, all you need to do is locate the button labelled “reset,” then press and hold that button for at least ten seconds. The button will most likely be inlaid into the gadget in the vast majority of instances.
Because of this, you are going to require some kind of instrument in order to prod at it. Either a pencil or a needle will do the trick for this task. After you have performed the reset, it will take the device a minute or two to reboot, and then it should begin operating normally once more.
The Closing Statement
We regret to inform you that these are the only remedies that we are able to offer that can be performed without leaving the convenience of your own home. If none of these have been successful, then the next logical step is to bring in the experts. This is the only line of action that makes sense.
We strongly encourage you to get in touch with customer service as soon as possible because the problem is probably one of a very complex kind. While you are speaking with them, be sure to inform them of the measures you have already made to address the issue and the steps you plan to take in the future. They will be able to get to the bottom of the issue much more rapidly if they proceed in this manner.