How To Put The New Pace 5268ac Router Into Bridge Mode?

AT&T customers are some of the most avid adopters of the Pace 5268ac as their gateway Internet Wireless modem router. Some users have reported having problems setting the Pace 5268a router in pass-through bridge mode, despite the fact that connecting to it and using it is simple. In the past, the majority of AT&T routers were shipped with a bridge mode configuration by default. On the other hand, consumers are currently stumped as to how to switch the brand new Pace 5268ac router into bridge mode.

Let’s imagine you want to utilise another router, such as a D-Link router, therefore you decide to set your Pace5268ac router to the Bridge mode so you can do so. This is how you should go about doing it.

Bridge Mode Pace 5268AC Pace

The very first thing that has to be done is to connect the LAN ports of the gateway to the LAN ports of the D-link router. Now you need to turn on the D-link router. Following that, you will need to restart the gateway. After the Gateway is back up, you will need to launch your web browser. Enter http://192.168.1.254 in the address bar of your browser, and then hit the enter key. Now, navigate to Settings, then Firewall, and finally go to Applications, Pinholes DMZ. After reaching that point, you will need to choose the D-link device. After you have chosen the device, you will need to make sure that the DMZ+ mode checkbox is selected. Following that, select the save button.

You will now need to go into the wifi settings on the Pace 5268ac in order to disable its wireless network. In the event that you deactivate it, the Pace wireless network will no longer be operational. At this point, you will need to restart the Pace router while also powering down the D-link router. You can now turn on your D-Link router after the Pace router has been restarted, at which point you will be in bridge mode on both devices.

You can choose to go with one of the other available options instead. To achieve this, you will need to configure the D-link router to operate in access point mode. You can do this action by navigating to the user interface (UI) of the D-link router. After that, navigate to the Settings menu, and then select the Internet option. Now adjust the mode of the device such that it is in Bridge Mode. Additionally, you will be need to turn off the wireless network on your Pace 5268 ac router.

On the 2.4 GHz network, you should make sure that you are only using channel 1, channel 6, or channel 11 when communicating with other devices. This is an essential piece of advice. If you use another network, there is a chance that you will run into some problems, and the likelihood of this increasing the more networks you use.

If you want to make it simpler for yourself to reconnect the devices in the future, you may give the D-Link network the same name as your gateway. This will make it easier for you to identify the network when you need to reconnect the devices. Additionally, you should use the same password for both accounts.

You don’t need to use static IPs, which is another helpful piece of information that should be mentioned here. Get rid of static IPs as soon as possible. Although technically speaking, the aforementioned approach is not exactly bridge mode with the gateways, it is mostly a pass through the public IP and firewall. Despite this, it is successful in resolving the issue.

If you are utilising any of the ways described above, make sure that you do not connect Ethernet cables that are running to TV receivers if you have U-verse TV. This is the last but not the least important step. Simply ensure that they remain connected to your Pace 5268ac router.

Categorized in: