Home Tech Kernel Mode Trap Error Windows 8.1

Kernel Mode Trap Error Windows 8.1

2
0

Kernel Mode Trap Error Windows 8.1 – Here we can see “Unexpected Kernel Mode Trap Windows 10”

0x0000007F – Fix Windows

Find the solution for the 0x0000007F UNEXPECTED TRAP error message that affects Windows XP or Windows Vista. Windows 7, Windows 8 and Windows 8.1.

Concerning the “0x0000007F” error

Itechbrand has collected the following information about this errorBased on the knowledge of our global network of engineers, developers, technicians or partner organisations,

Description and symptoms

These alerts, warnings, and error messages all relate to the current problem.

Symptom 1: 0x0000007F error screen

The kernel-mode error can be triggered by two situations: the CPU created a condition that isn’t allowed to be caught by the kernel, or the condition is unrecoverable.

The most common cause is hardware failure, mostly thanks to faulty or mismatched memory. You may also experience this error if you have faulty software.

Windows has been shut down to prevent any further damage from a problem. Send it to you computer.  This may be your first Stop error screen. Restart your computer. If your screen does not come back up, these steps will assist you.  You must ensure that your disk space is sufficient. Drivers with insufficient space will be reported. If the Stop message is displayed, you can disable the driver or contact the manufacturer to get driver updates. Change video adapters. Check with your hardware vendor for BIOS updates. Disable There are many BIOS options for memory, including shadowing and caching. If you have any questions, please contact us. Safe Mode can be used for disabling or removing components. To choose Advanced Startup Options, press F8. Select Safe Mode  Technical information  *** STOP: (0x0000000000), 0x0000000000

Windows 8 computers now have the error codes replaced by UNEXPECTED _KERNEL_MODE_TRAP

(Your computer experienced an error and must be restarted. We are only gathering some error information, and will restart the service. (0%) Complete

This Error: Causes

An error could be caused by one or more of these factors.

1. Faulty RAM Module

The error could be caused due to a RAM module fault, which causes read/to-write errors. It’s best to scan your system memory for the problem and then replace the RAM module.

Cause 2: Older or corrupt device drivers

Sometimes device drivers can be misconfigured, corrupted or out of date. This can also happen after a restart. Windows update or a Windows downgrade from a more modern system to an older one.

Windows 0x0000007F

Fix 1: Check new hardware

It is possible that the error occurred during a recent hardware upgrade.

The problem can be fixed by simply removing damaged hardware.

If you believe the error occurred after the installation of the new hardware’s driving power, please refer to Fix #3.

2. Try RAM

Mismatched or faulty memories can often lead to this error.

See also: Facebook Tests New QR-Code Payments for US Users

If you receive the error code “0x0000007F” immediately after installing a RAM upgrade, it is best to pack your computer up and take it out. To confirm that the error is gone, restart your computer.

The Windows Memory Diagnostic Tool can be used to determine if there is any RAM problem.

These steps will help you do it:

  1. Click Start
  2. Type Memory Diagnostics Tool into the search box
  3. Right-click Memory Diagnostics Tools
  4. Choose Run as Administrator
  5. These are the steps to get started with diagnostics.

If Windows Memory Diagnostic doesn’t return any results, you can also use the Easy Recovery Essentials Automatically Repair feature. This will examine your CPU, HDD and RAM in one step.

  1. Find Easy Recovery Tips
  2. Burn the ISO Image. These are the steps to create a bootable ISO file. If you’d rather, you can also create an ISO image as a recovery USB.
  3. Easy recovery essentials
  4. Automated Repair
  5. Click Next and wait for the Automated Repair process’s end. Automated Repair will notify you if there are any problems with your RAM or hard drive.

Fix 3: Update or disable drivers

To check if a faulty drive causes the error, run an automatic driver update or manually update the drivers to the newest available versions.

These steps will allow to manually update your driver.

  1. Click Start
  2. In the search box, type “Devmgmt.MSc”
  3. Select devmgmt to be shown in the results.
  4. Right-click on the driving force
  5. To update your driving force, select Update Driver Software
  6. Select Disable to disable driving force
  7. To remove the driving power, click Uninstall.

These steps will allow for an automatic driver update

  1. Click Start
  2. Visit Printers and Devices
  3. Right-click your computer
  4. Select Device Installation Settings
  5. You can choose Yes to have it done automatically
  6. Click on Save Changes
  7. Follow these steps to continue.

4. Disable memory cache in BIOS

These steps will enable to you open your BIOS Menu, and disable Cache Memory. You can now check if the 0x0000007F error is present.

  1. Restart your computer
  2. Use F2 or Del Key to enter BIOS Setup
  3. Navigate to Advanced menu
  4. Select Cache Memory
  5. It must be disabled
  6. For a quick exit and to save a lot of money, press F10.
  7. Select Yes

Applicable systems

This knowledgebase article Windows can be used on the following operating systems:

  • Windows XP (all editions).
  • Windows Vista (all Editions).
  • Windows 7 (all editions).
  • Windows 8 (all editions).
  • Windows 8.1 (all Editions).
  • Windows 10 (all editions).

LEAVE A REPLY

Please enter your comment!
Please enter your name here