What Is HT160? How to enable/Disable?

This is a question that has been on many people’s minds lately, as their internet connections have been slowing down. In this blog post, we will explain what HT160 is and how to enable/disable it. HT160 stands for “High-Speed 160Mbps” and refers to the maximum bandwidth that your Internet connection can handle. If you are experiencing slowdowns and your bandwidth usage is hovering around or above HT160, it may be time to upgrade your equipment or switch to a higher speed service. To enable/disable HT160, please follow these steps:

  1. Open up your web browser and go to http://www.speedtest.net/.
  2. In the left-hand side of the page, under “Settings,” click on “Network Tests.
  3. Under “Test Type,” select “Ping Test (60 seconds).
  4. Enter your IP address in the “Server Address” box and click on the “Start Ping Test” button.
  5. Wait 60 seconds for the test to complete and then click on the “Results” tab to view the results.
  6. If your bandwidth usage is above HT160, you will see a message in the “Results” tab stating that “Your connection is currently running at HT160 Mbps.” If your bandwidth usage is below HT160, you will see a message in the “Results” tab stating that “Your connection is currently running at 57Mbps.”
  7. To switch to a connection that is above HT160, click on the link in the “HT160 Mbps” column of the “Results” tab.
  8. To switch to a connection that is below HT160, click on the link in the “HT160 Mbps” column of the “Results” tab and then enter your desired bandwidth in the “New Connection Speed” box.
  9. Click on the “Save Settings” button and reload the page.
  10. Your new connection speed should be displayed under the “New Connection Speed” box.

How to Enable/Disable HT160?

HT stands for 160-bit encryption. HT 160 is a symmetric key algorithm that uses a 160-bit key. The algorithm can be used to encrypt data using AES and provides an integrity check against tampering.

To enable/disable HT160 in Windows 10, 8, 7:

  1. Launch the Settings app on your computer.
  2. Click Privacy in the left pane, and then click Encrypt my devices under Security & privacy settings.
  3. Under Encrypt my devices, select the desired option: Turn on encryption for all disks or Turn on encryption for specific disks (such as USB flash drives).
  4. Under Key protection, ensure that HT160 is selected: If it is not, you will need to enter your computer’s BitLocker key to enable encryption.

HT160: What Is It?

HT stands for Hypertext Transport Protocol. HT is a protocol that enables the transfer of hypertext documents across a network. HTTP is the most common protocol used to communicate with web servers. When HT is enabled, your browser will use it to connect to the web server. HT can be disabled in different browsers using different methods. The easiest way to disable HT in most browsers is through the preferences menu. For example, in Internet Explorer, click on the Tools menu and then select Internet Options. In Firefox, click on the Tools menu and then select Options.

In Chrome, click on the Chrome menu and then select Preferences…. Under “Advanced“, tick the box next to “Useocket.org (HTTPS) for all websites” and then close the Preferences window…. To disable HT for a specific website, type that website’s URL into your browser’s address bar and press Enter…


HT, or HyperText Transfer Protocol, is what allows your computer to talk to web pages and other devices over the Internet. It’s a set of rules that tell your browser how to send information between your computer and the web site you’re visiting.

When you first enable HT on your computer, you might see a few warnings about security issues. If you don’t want these warnings, simply go to Control Panel > Internet Options > General Tab > Security Level and adjust the slider to “Medium.” You can also disable HT completely by going to Control Panel > Internet Options > Advanced Tab > Hypertext Transfer Protocol (HTTP) and disabling both “Send As HTML” and “Use Secure Socket Layer (SSL).

How do you turn it on or off?

If you’re looking for instructions on how to turn your Home Theater on or off, we’ve got you covered. HT stands for home theater and is the feature that allows you to control your audio and video devices from one central location. To enable HT, go to Settings > General > About Phone and tap on the build number seven times (you’ll see a message that says “Developer mode enabled”).

Now go back to Settings and under Home Theater, toggle ON HT. To disable HT, repeat the steps above but switch HT OFF. You can also toggle HT on or off manually by pressing the Vol-Down key on your remote while watching TV.


Hello friends, In this post, we will be discussing HT160 – what it is and how to enable/disable it on your device.

If you are using a Windows-based operating system, the steps involved are as follows:

  1. Go to Start > Control Panel > System and Security > Administrative Tools
  2. Click on Device Manager
  3. In the “Device Status” column, locate your Huawei phone (for example) and double-click on its name
  4. On the “Components” tab, click on “Driver“. Under “Driver Details“, you will see a list of installed drivers for your Huawei phone
  5. Double-click on the driver that says “Huawei HUAWEI Mobile Connectivity Assistant v5.0“. This will open up a window called “Driver Settings“. On this window, if you look under the heading “Disable Driver Signature Enforcement“, you should see a checkbox next to it with a text box below it labeled as “Enable Signature Enforcement.” Uncheck this box if you want to disable signature enforcement or leave it checked if you want to enable it
  6. Click OK
  7. Close all windows that have opened up
  8. Restart your computer

If you are using an Android device, the process is slightly different.

The steps involved are as follows:

  1. Open your device’s Settings
  2. Scroll down and tap on Security
  3. Tap on the three lines in the “Security Configuration” section (this will open up a list of options)
  4. Tap on “Screen Lock” and then enter your PIN or password
  5. Under “Device Management”, find and tap on Huawei Mobile Connectivity Assistant
  6. On the “Configure” screen, make sure that the box next to “Disable Signature Enforcement” is unchecked
  7. Tap on OK and then tap on OK again
  8. Close all windows that have opened up
  9. Restart your device

Categorized in: