Dish Remote Won’t Change TV Input: 5 Ways To Fix

Consumers looking for a dependable on demand entertainment service that also enables them to record their favourite shows should consider the DISH network business as one of the best options available to them. After your Dish service has been set up with a receiver, you will be able to manage it with the help of a dedicated remote controller. Even while this is wonderful when everything operates as it should, it is not a particularly spectacular setup in the event that your remote control unexpectedly stops functioning, as it may then be difficult to get your TV to operate in any capacity at all.

In the following paragraphs, we will discuss some of the most common issues that DISH customers come into, as well as some potential solutions to these problems. If you are having trouble, it is my hope that we will be able to assist you.

The Dish Remote Is Unable to Change the TV Input 1. Replace the Batteries.


The first step that should be taken is the easiest one. If you are unable to change the input of the TV, it is possible that the batteries in the remote control have completely run out or at the very least are too weak to operate your system. If you replace these with a new set that you know for a fact is fully powered, hopefully this will fix the issue that you are having. If this doesn’t fix the issue and you still can’t get your TV to function, continue reading this post and see if any of the other remedies are applicable to your situation. If none of them are, then you’ll need to go elsewhere.

2. Cables


After you have determined that the remote does in fact have power, the next thing you should examine is the wires that connect the receiver and the television set. First things first, make sure that each of the cords is firmly inserted into the socket that corresponds to it. If any of the wires are dangling loosely or have been pulled out of their sockets, you should reattach them to the appropriate location.

While you are verifying the connections, you should also inspect the cables for any obvious signs of wear and tear, such as fraying or damage. Any cracks or fissures within the shell may indicate that the wires beneath have been damaged. You should give it another shot once you have confirmed that everything is correctly connected and that there is no damage. If you are still experiencing issues, please go with working your way through our troubleshooting guide as we continue to investigate the cause of your issue.

3. Use of the Limited Mode

In a Limited Capacity

There is a possibility that the settings have been altered if you are positive that electricity should be reaching both the remote control and the television set. It’s possible that the ‘restricted’ mode on your remote was selected inadvertently. Because you are unable to use the remote control for your television, you will have to make any necessary adjustments by using the control buttons that are physically located on the television itself.

Find the button for your TV settings by navigating to where your control buttons are located (they are typically located somewhere within the frame of the screen – frequently flush with the surround, so you may need to run your fingertips around to locate the buttons). After you have found the correct option, you will need to use the toggle to turn off the limited mode again. It is my sincere hope that this will rectify the situation.

4. SAT Button

SAT Button

If you are utilising the 54-remote, you can attempt to use the SAT button by pressing it. If you want to give this a shot, rather than pressing the power button, you should press and hold the SAT button for a short period of time. This has the effect of starting over completely. What ought to occur is that it ought to switch on the TV while simultaneously changing the TV input from HDMI to the proper input that is compliant with your DISH system. This is what ought to take place.

5. Reprogram the Wireless Remote Control.

You can try to reprogramme the remote control if you are still unable to get the remote to change the TV input. If this continues to be a problem for you, the remote control may need to be replaced. We are going over the steps to reprogramming the 40.0 remote merely due to the fact that it is the most widely used device. You can look up instructions on how to reset your specific model of remote control on the internet if you have a different kind of remote. Make an effort to proceed in the following order:

After you have completed the first step, which is to press the home button twice, the TV should then display the menu that is displayed on-screen. Next, select Settings from the drop-down option.
Now, repeatedly tapping the remote control will bring up the available pairing options.
After that, choose the device for pairing that you want to use.
After then, a list of choices from among the available possibilities should appear. To proceed, select the pairing wizard from the available options.
As a result of the fact that various devices will each have their own unique code, you will be required to select the appropriate code for the TV with which you wish to connect it. Therefore, you need to ensure that you are familiar with the brand and model of your TV.
After the wizard has completed all of its tasks, you will need to restart the TV before attempting to use the remote again. If everything goes according to plan, you should be able to use the remote after that.
If none of these solutions works, then it is possible that the problem is that your remote control is damaged beyond repair, in which case you will need to get a new one.