3 Ways To Fix Cox Mini Box Not Working

The COX Mini Box is the receiver that COX provides for you to use with your television set. The primary cable that is provided by COX is connected to the box, and the box then sends the signals along the wire that is connected to your television. The COX tiny box is a fantastic piece of hardware that not only enables you to stream high-definition television but also provides you with a plethora of other interactive choices such as pausing, recording, and more. However, it is possible for it to malfunction at times and lead to you making some mistakes. In the event that your Cox Mini box is not functioning properly, the following are some troubleshooting techniques that you can take in the comfort of your own home in an effort to get it operational again.

Fixing a malfunctioning Cox Mini Box requires troubleshooting.

1. Perform a hard reset on your Mini box.

Rebooting your tiny box should be the first step that you take to troubleshoot the issue. Simply turning it off and unplugging it from the power outlet is all that is required of you. After letting it sit for a minute or two, you should then reconnect it. This ought to resolve the issue for you, and you should be able to get it functioning normally once more. If the Mini box has become stuck at a given point or is displaying a specific error, you could use this troubleshooting option to fix the problem. If you are facing other problems, you might want to investigate the many solutions that are presented below.

2. Double-check all of your connections and cords.

Moving forward, if you are experiencing distortion, complete lack of signals, or a blurry screen, you need to verify the cables and connectors that are being used. The COX tiny box, which you are using to stream TV, essentially requires two wires in order to function properly. The cable box is connected to one of these wires through the wall outlet, and the other of these lines is connected to the television.

You have to check to see that both of these cables have been properly secured and that none of them are dangling free. You also need to inspect these cables for any evidence of wear or tear on them because another factor that can lead you to run into this kind of issue is wear and tear on the cables themselves. Even if the wires are in working order, you should nevertheless examine the connectors just in case. Check to see that none of the connectors have rusted or corroded in any way. You will also need to finger tighten the connectors on the coaxial cables if they are slack. This is something that can be done simply with these cables.

3. Get in Touch with Support

Because there is no button for resetting it and you cannot upgrade the firmware on these devices, these are the only two things that you may attempt on a COX tiny box. If neither of these things works, then you will need to contact customer support. As a result, you have a restricted number of choices. If you are unable to solve the problem using the options that were provided above, you will need to get in touch with support for further assistance.

It’s posible that COX is experiencing a momentary outage, that there’s another technical issue, or that your box simply stopped working properly. Simply contacting the customer service department will allow you to get any problem resolved, regardless of its kind. They will be able to tell you whether the problem is on their end and is being fixed, whether it is the result of some scheduled maintenance, or whether they will come to your location to diagnose the problem and find a solution for you.

Categorized in: