Can I Have 2 Routers With Spectrum? 6 Steps

Is it possible to have two Spectrum routers in the same home? YES!

Using two routers is one option to consider if you want to increase the area of service for your internet connection at your home or business. You also have the option of utilising a router that includes a modem integrated right in.

In this piece, we are going to concentrate on the routers that Spectrum has to offer. In addition, we will go over how you may set up your two Spectrum routers at either your house or your place of business. Your Internet’s speed, signal strength, and coverage will therefore all improve as a result of your actions.

Can I Use Spectrum With Two Different Routers?

Things that need to be ready.

Things That Need to Be Prepared:

To begin, utilising a regular DOCSIS 2/3/4.0 (cable) network to support two separate routers is a simple task that can be accomplished with relative ease. It is feasible to set up the connection over the same split coax line; however, in order to do so, you will need to have a splitter that is connected and working properly.

In addition, establishing a connection between the two routers using an Ethernet cable is the quickest and easiest option. So, let’s have a look at these things, shall we?

  • Determine Which Routers Will Serve As Your Primary And Secondary Connections.
  • Put the two routers in close proximity to one another.
  • Pick One: Connections Within the Same Local Area Network or Across Wider Area Networks
  • Install and configure both of your routers.
  • Proceed to configure each of your routers in order.
  • Modify Your DHCP Settings

How Does Spectrum Allow Two Routers To Be Connected?

1. Determine Which Routers Will Serve As Your Primary And Secondary Connections.

After you have obtained your two Spectrum routers, you will need to make a decision regarding which one will serve as the primary router and which one will serve as the backup router.

The primary router is the device that serves as the default link between your modem and the wall outlet.

A secondary router is an additional device that can be used in conjunction with your primary router.

Additionally, it is suggested that the most recent router model with the highest specifications serve as your primary device. Seeing as how it is recommended that you use your previous router as a secondary one. It doesn’t matter which one you choose to be the primary and which one you choose to be the secondary if they both have identical characteristics.

Put the two routers in close proximity to one another.

2. Position the two routers in close proximity to one another.

I order to keep the connection’s signal strength at a high level, the two routers need to be located in close proximity to one another. In addition, you should place your routers in a location with a lot of open space so that there won’t be any obstructions to the signal emission. In addition, you will be thankful to yourself in the long run for having quick access to the router’s maintenance.

3. Determine Whether You Want Your Connections to Be LAN-to-LAN or LAN-to-WAN.

Your already-established network connection can be extended to your second router using a LAN-to-LAN link.

A connection between your local area network and a wide area network (WAN) produces a distinct network within your primary network. (It is important to keep in mind that you will not be able to share files between the two distinct networks.)

Taking into account your environment and the way you typically use your computer will help you decide which connections are best for you. At home, it is common practise for consumers to opt for the LAN-LAN connection because it enables users to quickly transfer data and files between both routers.

4. Configure both of your network’s routers

Before you connect your primary router, check to see that your modem is properly connected and that it is turned on:

Pull the power cable out of the back of the modem, then reattach it to the rear of the modem.

You will need to wait anywhere from two minutes to five minutes for the modem to connect to the network. When the status light on the front of the modem is lit up continuously, you will know that it is connected.

Make the connection between the router and the modem using the Ethernet cable.

After that, connect the router to the mains supply by plugging it in. Once more, you’ll need to wait anywhere from two minutes to five minutes for the status light on the front panel of your router to stop blinking and turn a steady blue colour.

After that, utilise an additional Ethernet wire to link the two routers together.

At this point, you should utilise an additional Ethernet connection in order to connect your computer to the routers.

5. Configure your routers in order, starting with the newest one.

After that, you should test the functionality of your router and then experiment with connecting a device to the internet through the modem. In the event that you are unable to connect, you will have to setup the router.

In the meanwhile, you will need to make a call to Spectrum in order to check on the activation of your Spectrum Internet service. You can either give them a call or utilise the mobile data on your device to access their website and then follow the steps there.

In order to configure your secondary router, you will first need to configure your primary router using the primary router as a reference, if necessary.

Modify your DHCP settings.

6. Alter your DHCP settings

You will need to go to the router’s configuration page in order to set up a LAN-to-LAN network. The DHCP service addresses for the primary router should be set to a range between and

You can keep the default settings active for the LAN-to-WAN connection.


In conclusion, if you have decided that reading this article was helpful in reaching your decision to go with 2 routers, you can call Spectrum Internet at 1-800-892-4357 today to order your second router. If you think that your family, friends, or coworkers could benefit from reading this post, please feel free to share it with them!